04 / CalibrationBack to features

Bring your speakers
into focus.

When certain bass notes dominate at your seat, measure how your speakers and room are working together.

Kanjoni guides you through a microphone sweep, identifies repeatable bass peaks and lets you set the target and correction strength. A fresh measurement shows how the correction performed at your seat.

Room and speaker measurements need a microphone. Other effects can be used independently.

Explore Calibration
A warmly lit listening room with two speakers and a measurement microphone at the listening position, overlooking the canyon.
Measure
Record the response at your seat.
Verify
Check with a fresh recording.
Inside Calibration

Measure what reaches your seat.

Choose one listening seat or a shared seating area. Kanjoni shows where to place the microphone for each of five positions and looks for bass peaks that recur across them.

Set correction strength and limits.

Choose how much to reduce the peaks and set the maximum cut.

Example room response With correction
65%
6 dB
01Set the correction

Set the bass target, correction strength and filter depth within the 35–500 Hz fitting range. Keep left and right linked or adjust them separately. Deep cancellations and room decay can require changes to placement or the room itself.

02Verify at three fresh positions

At each position, Kanjoni plays a sweep with the correction off and another with it on. Compare the measured change with the filter prediction.

Keep exploring / 05Alignment

Different distances produce different arrival times.